The Hi-MO X10 price in Pakistan should be compared using a complete LONGi model code and a dated supplier quotation — never a family name alone. Hi-MO X10 is an HPBC 2.0 back-contact product family, and the series name does not establish one universal wattage, dimension, rear-side capability or warranty. This guide explains how to compare an offer without confusing a family-level claim with the panel you will actually receive, so you pay for documented equipment instead of a slogan.

If you are comparing generations, see the LONGi Hi-MO X9 guide.

LONGi Hi-MO X10: identify the exact variant first

LONGi’s official Hi-MO X10 family page lists different product variants, and Pakistani quotations rarely specify which one you are getting. Before discussing price, ask for three documents: the matching manufacturer datasheet, a photograph of the module label, and written confirmation of the supplied variant. The model code, power bin and datasheet revision must agree across the quotation, the invoice and the equipment that arrives. If a seller quotes “Hi-MO X10 645W” but the datasheet they send belongs to a different power bin, stop — you are being sold a family name, not a panel.

This matters because variants differ in dimensions, weight, electrical characteristics and bifacial capability. A 645W variant and a lower-bin variant from the same family can require different string designs and different roof layouts. Our panel authenticity guide shows how to check that labels, serials and datasheets all point to the same product.

Hi-MO X10 645 watt price in Pakistan: the quote checklist

For a 645W offer, record these six lines separately: panel-only price, quantity, condition (new vs clearance), tax, delivery to your city, and local warranty support. Then divide the delivered panel-only total by the total rated watts to get the comparable figure. Do not compare a pallet rate with a single-panel retail price, and do not compare an equipment-only rate with an installed system price.

As an arithmetic example only — not a verified current supplier rate — a hypothetical PKR 25,800 price for a 645W module works out to PKR 40/W. Use the same division on your real offers. For other power bins, repeat the method rather than applying one 645W figure to every X10 variant. Our price-per-watt guide shows how exclusions like missing delivery or tax quietly change the comparison.

New to per-watt comparison?

Learn the one calculation that makes every panel offer comparable.

Price-per-watt method

Hi-MO X10 bifacial price: verify the rear side before paying extra

Check whether the exact quoted module is documented as bifacial or monofacial. Back-contact cell technology (HPBC) and bifacial module construction are different descriptions — do not assume that every X10 panel collects useful energy from both sides simply because a listing says HPBC 2.0. A bifacial design needs usable rear illumination and a suitable mounting arrangement: a close-mounted dark roof, structural shading or a blocked rear surface can reduce the rear gain to nearly nothing.

If you are quoted a bifacial X10 at a premium, ask the seller for a site-specific rear-gain estimate for your roof geometry — not a brochure percentage. Read our bifacial roof-suitability guide before paying extra for promised rear-side output that your installation cannot deliver.

Size, voltage and inverter compatibility

The Hi-MO X10 size depends on the variant. Use the datasheet’s length and width in millimetres; divide by 304.8 to convert each measurement to feet. Add access paths, setbacks and row spacing before judging how many panels fit the roof — a panel that looks compact on paper can still tile badly around water tanks and parapets.

For LONGi Hi-MO X10 voltage, distinguish open-circuit voltage from voltage at maximum power. Your installer must check cold-weather string voltage, the inverter’s operating voltage range and its input-current limits. A wattage match by itself does not establish electrical compatibility: an X10 string that exceeds the inverter’s voltage window on a cold January morning is a design failure, not a bargain. Use our panel-count and sizing guide to see why roof layout, load profile and inverter limits change the final quantity.

Panel-count example

Eight 645W panels provide 5.16kWp of rated DC array capacity; sixteen provide 10.32kWp. These are capacity calculations, not validated string designs — the final count follows the roof survey and the inverter’s limits, not the brochure.

Before you pay: the X10 buyer checklist

  • Complete model code, matching datasheet revision and a photograph of the actual module label.
  • Dated written quotation: panel-only price, quantity, tax, delivery, and who handles warranty claims in Pakistan.
  • Variant confirmation in writing — 645W or otherwise — matching across quotation, invoice and equipment.
  • Bifacial or monofacial stated explicitly, with rear-gain assumptions documented if you pay a premium.
  • Installer string design showing voltage, current and inverter compatibility for your specific variant.
  • Serial numbers recorded and LONGi’s authenticity process completed before installation.

Comparing X10 against Jinko?

See the five datasheet numbers that decide LONGi vs Jinko properly.

LONGi vs Jinko guide

Frequently asked questions

Is today’s X10 price the same in Lahore and Karachi?

Not necessarily. Compare dated quotations for the same variant and quantity, including transport and tax. This article does not publish an unsourced live city-by-city survey.

Does a larger X10 panel always make the system cheaper?

No. Fewer modules may reduce some mounting work, but panel dimensions, inverter inputs, roof utilisation and the delivered rate determine the complete project cost. Compare the final design, not only watts per panel.

How do I know my X10 panels are genuine?

Match the module label, serial numbers and datasheet revision, then run LONGi’s official verification process before the panels go on the roof. Keep the dated invoice and the installer’s equipment schedule with the serials recorded.

Can X10 panels work with my existing inverter?

Only if the string voltage, current and connector requirements of your exact variant sit within the inverter’s limits. Ask the installer for the string calculation in writing — “same watts” is not compatibility.

Content reviewed: 19 October 2026. Calculation examples are illustrative. Solar Price Pak publishes independent information and does not supply or install equipment.

3 Responses

Leave a Reply

Your email address will not be published. Required fields are marked *