
Backup starts with a list, not a battery
Most solar disappointments in Pakistan trace back to the same mistake: the family bought equipment first and defined “essential” afterwards. The inverter had an impressive headline rating, the battery looked big — and then the first long outage revealed that nobody had agreed which rooms stay lit, for how long, and what gets switched off. Planning your essential backup loads before choosing equipment is the single highest-value hour you will spend on your solar project. This guide shows you how to do it properly.
Step 1: list every load, room by room
Walk through your house with a notebook — or better, with the family members who actually use each room. Record each appliance, its wattage (from the rating plate, not from memory) and roughly how many hours it runs during a typical outage window. Typical Pakistani household figures to start from:
- Ceiling fan: 70–80W each (a home with 4 fans = ~300W)
- LED lights: 10–15W each
- Wi-Fi router + phone charging: 30–60W combined
- Refrigerator: 120–180W running (but it cycles on and off)
- LED TV: 80–120W
- Water pump: 750W–1,500W with a large starting surge
- Air conditioner (1-ton inverter): ~1,000W running
A salesperson’s generic list will not match your home. Your list must.
Step 2: sort into three buckets
Be ruthless — this is where realistic systems are born:
- Essential: must run through the outage — a few lights, fans in occupied rooms, router, refrigerator.
- Optional: nice to have — TV, extra fans, laptop.
- Deferrable: can wait for grid power — water pump, iron, washing machine, air conditioner.
The water pump deserves special attention: its starting surge can be three to five times its running wattage, and one pump starting can trip an inverter that handles everything else comfortably. Deferring it to grid hours is usually the smart move.
Step 3: do the maths (a worked example)
Suppose your essential bucket is: 4 fans (300W) + 6 LED lights (75W) + router and charging (50W) + refrigerator averaging 150W = roughly 575W of simultaneous load. Over a 4-hour evening outage, that is about 2.3kWh of energy — before inverter losses (add ~10–15%) and before keeping a reserve in the battery (never plan to use 100%). So you are looking at roughly 3kWh of usable storage for this modest list.
Now watch what happens when discipline slips: add one 1kW appliance for two hours and you have added 2kWh — nearly doubling the requirement. This is why the three-bucket sort matters more than any equipment brand. Our battery backup-time guide walks through the full calculation with losses and reserves included.
Calculate your exact backup time
Turn your load list into battery size with our step-by-step method.
Step 4: get the circuits planned professionally
Hand your load list to the installer and ask for three things: a written statement of which circuits the backup covers, verification that the inverter’s backup-mode output (not just its grid-tied rating) handles your simultaneous essential load, and a labelled distribution arrangement so anyone in the house can see what stays on. A hybrid inverter is the usual heart of such a system — confirm its backup output, battery compatibility and changeover behaviour in writing.
Also confirm battery discharge limits: a battery bank can hold plenty of energy yet be unable to deliver your 575W if its maximum discharge current is too low. Energy (kWh) and power (kW) are different constraints — your plan must satisfy both. Compare storage options in our solar battery guide.
Once that list is agreed, the inverter’s operating mode decides whether stored energy is spent or preserved — compare SBU, SUB and UTI inverter modes in Pakistan.
Choosing the inverter for backup duty
Backup output, battery voltage and changeover — what actually matters.
Frequently asked questions
Can a 3kW inverter run my whole house during load shedding?
Only if your simultaneous essential load stays under its backup-mode rating with margin to spare. A 3kW inverter will not run an air conditioner plus a water pump plus everything else — the three-bucket list is what keeps expectations honest. See our 3kW system guide for realistic sizing.
Should the refrigerator be on backup?
Usually yes — food spoilage is expensive — but remember it cycles, so budget its average draw plus starting surge. If backup duration is tight, the fridge is the first “essential” worth reconsidering.
How long should I plan backup for?
Plan for your area’s realistic worst-case scheduled outage plus a margin — in many Pakistani cities that means 3–6 hours. Planning for 2 hours and getting 6 is how batteries get destroyed by over-discharge.
Can I add more loads later?
Only if the inverter and battery bank were sized with headroom. Adding loads to a system designed with no margin shortens battery life and risks tripping. Discuss expansion plans with the installer upfront.