Lithium battery price in Pakistan should be compared by the exact model, usable energy, discharge power and inverter compatibility. A 100Ah label is incomplete without voltage, and a 5kWh energy rating does not mean the battery can supply 5kW continuously.

Supplier listings checked: 15 October 2026. The examples below replace older unsourced price ranges. They record advertised amounts, not guaranteed stock, installation totals or manufacturer-approved compatibility. Solar Price Pak is an information website and does not sell batteries.

Checked lithium battery price examples

Listed productListed amountEvidenceBuying caveat
Pylontech UF5000, listed as 5.12kWh, 51.2V 100Ah, IP20PKR 335,000W11stop Pylontech listing, checked 15 October 2026Confirm exact model, accessories and delivered total
Enerbyte wall-mounted, listed as 51.2V 100AhPKR 215,000Solarshop battery catalogue, checked 15 October 2026Request the full model code and supported inverter list
HiTHIUM, listed as 16kWh, 51.2V 314AhPKR 625,000Solarshop battery catalogue, checked 15 October 2026Check handling, location and actual usable-energy specification

These observations are not a market-wide minimum or an endorsement of a supplier. Ask whether tax, transport, rack or wall bracket, communication cable, protective devices and installation are included. A category page may change before the buyer places an order.

Where a seller’s product title and electrical values disagree, obtain the manufacturer datasheet before calculating value. Do not quietly convert a marketing label into a verified specification. We have not carried forward the older unsupported capacity-by-brand ranges.

Understand volts, amp-hours, kWh and kW

Nominal energy in kWh = nominal volts × amp-hours ÷ 1,000. A 51.2V, 100Ah rating gives 5.12kWh of nominal energy. A 12.8V, 100Ah rating gives 1.28kWh. Identical amp-hours therefore do not mean identical storage.

Usable energy is the portion available under the manufacturer’s operating limits. Continuous discharge power is a separate constraint. For a provisional example, 51.2V × 100A equals 5.12kW at nominal voltage, but that calculation does not establish an actual battery’s permitted current, continuous AC output or inverter losses.

Ask for documented continuous and peak discharge limits, peak duration, charging current and operating temperatures. These determine whether the selected battery can support the intended appliances as well as how long it may run them.

Calculate a backup requirement before choosing a capacity

List the essential appliances and their measured or documented electrical inputs. Include how long they operate during an outage and which run together. Separate an always-on load from an appliance that cycles. Motor starting requirements need their own check.

For an illustrative 600W average essential load running for four hours, the required AC energy is 0.6 × 4 = 2.4kWh. If the design assumes 90% conversion efficiency and permits use of 80% of nominal battery energy, the arithmetic requirement is 2.4 ÷ (0.9 × 0.8), approximately 3.33kWh nominal.

Those percentages are example assumptions, not universal settings. Replace them with the actual equipment limits and allow for temperature, ageing and the desired reserve. The designer must also confirm sufficient discharge power. Follow the battery backup-time calculation guide for the next step.

Compare lithium battery brands without assuming compatibility

Pylontech, Dyness, Knox, Inverex and other offered brands must be evaluated at model level. This page supplies a checked UF5000 price example; it does not establish current prices for every Pylontech product or any unsourced model from another brand.

Before accepting a substitute, request the exact inverter model, battery model, supported firmware and communication instructions. A CAN or RS485 socket alone does not show that two products use a compatible protocol. Confirm permitted charge settings and behaviour if communication is lost.

Low-voltage and high-voltage storage platforms are different system choices. Match the supported voltage range and complete installation instructions. Do not assume a battery can be connected in series or parallel merely because a dealer describes it as modular.

Installation, protection and future expansion

Choose a location using the battery manual’s temperature, ventilation, clearance and enclosure requirements. Consider water exposure, direct sun, access for service and the weight of the assembly. An enclosure rating alone does not authorise every outdoor location.

The installer should specify suitable conductors, protection, isolation and mounting. Obtain a handover record showing settings, shutdown instructions and the equipment supplied. Electrical installation work should be performed by a qualified person using the applicable equipment instructions.

For later expansion, ask how many units the manufacturer permits, whether ages and capacities may be mixed, and which additional controls or cables are required. Record the answer now. A future expansion promise without the required model documentation is difficult to evaluate.

Lithium versus lead-acid: compare documented service conditions

Compare complete options at the same backup load, runtime and reserve. Include the usable energy allowed by each model, installation work, maintenance requirements and replacement assumptions. Avoid applying one fixed lifespan to every battery chemistry.

Cycle-life figures apply under specified test conditions and an end-of-life threshold. Calendar ageing also matters when a battery spends much of its time waiting for an outage. Read our cycle life versus calendar life guide before turning a headline cycle count into years of guaranteed service.

Warranty and quotation checklist

Frequently asked questions

Is the cheapest 100Ah battery the best value?

First compare voltage, usable energy and discharge power. Then compare compatibility, included installation parts and enforceable warranty terms. The amp-hour number alone cannot rank the offers.

Will one 5.12kWh battery run an entire house overnight?

That depends on the home’s actual overnight energy and simultaneous load. Calculate the essential-load requirement rather than assuming the nameplate capacity supplies every appliance.

Can I use the listed amount as my total project budget?

No. The table records advertised equipment prices. Obtain a complete installed quote and check its validity before committing.